RF SAW Filter
Part Number Package Application Last Modified
862-RF422.25M-A

3.0 x 3.0 SMD

 CDMA450 Mar. 2 2007
.
TYPE :
CDMA450, Balanced RF-Rx SAW Filter

PART NUMBER :
862-RF422.25M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 422.5 - MHz
Maximum Insertion Loss 420.0~ 425.0 MHz - 2.6 4.8 dB
Stop Band Attenuation:
0.3~ 410.0 MHz
40 50 -  dB
410.0~ 415.0 MHz
 35 48 -
445.0~ 600.0MHz
40 48 -
600~ 1200.0 MHz
 40 55 -
1200~ 2000.0 MHz
 35 50 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (balanced ended)* - - 100 - ohm
VSWR 420.0~ 425.0 MHz - 1.9 2.5 -
Maximum Input Power - - - 27 dBm
Operating Temperature - -30 - +80 ºC
* No Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
G Out
H Ground
 
 
TEST FIXTURE
Load Impedance = 100 ohms
Source Impedance = 50 ohms
 
FREQUENCY RESPONSE
 
VSWR
 
SMITH CHART
Part No.:
862-RF422.25M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map