RF SAW Filter
Part Number Package Application Last Modified
805-RF325.3M-A

5.0 x 5.0 SMD

 Wireless Mar. 10, 2007
.
TYPE :
Wireless, RF SAW Filter

PART NUMBER :
805-RF325.3M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 325.3 - MHz
Insertion Loss 322.0 ~ 328.6 MHz - 2.5 3.5 dB
Stop Band Attenuation:
Fo-100.0 ~Fo-39.5 MHz
40 50 -  dB
Fo+39.5 ~F+100.0 MHz
 50 60 -
Ripple in 322.0 ~ 328.6 MHz- - 0.8 1.5 MHz
Source Impedence (single ended)*
-
 - 150 - ohm
Load Impendance (single ended)* - - 150 - ohm
DC Voltage - - - 10 V
Maximum Input Power - - - 0 dBm
Operating Temperature - -10 - +60 ºC
* With Matching Network (Ref. Testing Environment Circuit as shown)
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Ground
F Out
G Ground
H Ground
 
TEST FIXTURE
 
FREQUENCY RESPONSE
 
Part No.:
805-RF325.3M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map