RF SAW Filter
Part Number Package Application Last Modified
805-RF315.0M-A

5.0 x 5.0 SMD

 Remote Control Mar. 10, 2007
.
TYPE :
RF SAW Filter for Remote Control

PART NUMBER :
805-RF315.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 315.0 - MHz
Insertion Loss 314.82 ~ 315.22 MHz ILmin - 2.0 4.0 dB
Stop Band Attenuation:
10.0 ~270.0 MHz
 45 55 -  dB
270.0 ~309.0 MHz
30 35 -
309.0 ~313.94 MHz
15 20 -
316.0 ~335.0 MHz
10 15 -
335.0 ~400.0 MHz
35 45 -
400.0 ~1000.0 MHz
 45 55 -
Ripple in 322.0 ~ 328.6 MHz- - 0.8 1.5 MHz
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
DC Voltage - - - 10 V
Passband (relative to llmin) -
- - 1.5 3.0 dB
- - 2.0 6.0 dB
3dB Passband Width (relative to llmin) - 0.8 0.92 - MHz
Operating Temperature - -40 - +105 ºC
* With Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground
C Ground
D Ground
E Out
F Ground
G Ground
H Ground
 
TEST FIXTURE

 
 
FREQUENCY RESPONSE
 
Part No.:
805-RF315.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map