RF SAW Filter
Part Number Package Application Last Modified
803-RF935.5M-B

3.0 x 3.0 SMD

 Wireless Mar. 2, 2007
.
TYPE :
RF SAW Filter for Wireless

PART NUMBER :
803-RF935.5M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 935.5 - MHz
Maximum Insertion Loss 929.0~ 942.0 MHz - 2.5 3.0 dB
Stop Band Attenuation:
D.C.~ 875.0 MHz
50 60 -  dB
875.0~ 895.0 MHz
 48 55 -
978.0~ 1005.0MHz
40 44 -
1005.0~ 1500.0 MHz
 50 57 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
VSWR 929.0~ 942.0 MHz - 1.45 2.0 -
Amplitude Ripple 929.0~ 942.0 MHz - 0.3 0.8 dBp-p
Maximum Input Power - - - 15 dBm
Maximum DC Voltage - - - 5 V
Operating Temperature - -30 - +65 ºC
* No Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
 
Part No.:
803-RF935.5M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map