RF SAW Filter
Part Number Package Application Last Modified
803-RF311.0M-A

3.8 x 3.8 SMD

 Wireless Mar. 10, 2007
.
TYPE :
Wireless RF SAW Filter

PART NUMBER :
803-RF311.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 311.0 - MHz
Insertion Loss 309.35 ~ 312.65 MHz - 1.6 3.0 dB
Attenuation:
DC ~ Fo-42.8 MHz
50 55 -  dB
Fo+4.00 ~ Fo+200.0 MHz
 50 55 -
Source Impedence (single ended)*
-
 - 150 - ohm
Load Impendance (single ended)* - - 150 - ohm
Amplitude Ripple 309.35 ~ 312.65 MHz - 0.6 2.0 dBp-p
Maximum Input Power - - - 0 dBm
Maximum DC Voltage - - - 10 V
Operating Temperature - -30 - +65 ºC
* With Matching Network(ref. Testing Enviroment Circut as Shown below)
* Thoseimpedances could be modified with different impedance values and/or structures, if necessary
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 150 ohms
 
FREQUENCY RESPONSE
 
Part No.:
803-RF311.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map