RF SAW Filter
Part Number Package Application Last Modified
803-RF243.95M-B 3.8 x 3.8 SMD PHS Mar. 10 2007
.
TYPE :
243.95 MHz RF SAW Filter

PART NUMBER :
803-RF243.95M-B
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency (Fo) - - 243.95 - MHz
Insertion Loss - - 3.2 4.0 dB
Group Delay Ripple Fo +/-100KHz - - 1.2 usec
Relative Attenuation Fo -23 MHz 55 61 - dB
Fo -1.2 MHz 40 54 -
Fo --600KHz 30 37 -
Fo +600KHz 30 40 -
Fo +1.2 MHz 40 46 -
Fo +23 MHz 55 57 -
Source Impedance - - 50 - ohm
Load Impedance - - 50 - ohm
Amplitude Ripple Fo +/-100KHz - 0.9 1.5 dB
Operating Temperature Range - -10 - +60 C
Maximum DC Voltage - - - 0 V
Maxium Input Power - - - 10 ohm/pF
* With matching network(Ref. Testing Enviroment Circut as Shown Below)
.
PACKAGE OUTLINE


Pin Layout
A Ground
B Input
C Ground
D Ground
E Output
F Ground
TEST FIXTURE

FREQUENCY RESPONSE
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com		 Part No.:
803-RF243.95M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map