Oscilent Corporation RF SAW Filter

Part Number	Package	Application	Last Modified
802-RF861.0M-A	3.0 x 3.0 SMD	iDEN Rx	Mar. 2, 2007

TYPE :

iDEN, RF-Rx SAW Filter

PART NUMBER :

802-RF861.0M-A

. .

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS

PARAMETERS	Condition	Minimum	Typical	Maximum	Units
Center Frequency (Fo)	-	-	861.0	-	MHz
Maximum Insertion Loss	851.0~ 871.0 MHz	-	2.5	3.5	dB
Attenuation:	DC~ 806.0 MHz	27	49	-	dB
	806.0~ 825.0 MHz	37	50	-
	896.0~ 902.0MHz	28	34	-
	905.825~ 924.825 MHz	27	39	-
	906.0~ 979.0 MHz	37	53	-
	1070.0~ 1089.0 MHz	47	51	-
	1089.0~ 3000.0 MHz	27	32	-
Source Impedence (single ended)*	-	-	50	-	ohm
Load Impendance (single ended)*	-	-	50	-	ohm
VSWR	851.0~ 871.0 MHz	-	1.6	2.0	dB
Amplitude Ripple	851.0~ 871.0 MHz	-	0.6	1.5	dBp-p
Maximum DC Voltage	-	-	-	5	V
Maximum Input Power	-	-	-	15	dBm
Operating Temperature	-	-30	-	+70	ºC

* No Matching Network(Ref. Testing Enviroment Circut as shown below)

PACKAGE OUTLINE (mm)

TEST FIXTURE

Load/ Source Impedance = 50 ohms

FREQUENCY RESPONSE

VSWR

SMITH CHART

Part No.:

802-RF861.0M-A