RF SAW Filter
Part Number Package Application Last Modified
863-RF433.92M-D

3.8 x 3.8 SMD

 Remote Control January 2010

PART NUMBER :
863-RF433.92M-D

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 433.92 - MHz
Insertion Loss 433.80 ~ 434.12 MHz - 2.0 4.5 dB
Attenuation
10.0 ~ 414.0 MHz
45 50 -  dB
414.0~ 428.0 MHz
 40 45 -
428.0 ~ 432.92MHz
15 20 -
434.92 ~ 442.0 MHz
 10 15 -
442.0 ~ 550.0 MHz
 35 40 -
550.0 ~ 1000.0 MHz
 45 50 -
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple 433.76 ~ 434.16 MHz - 1.0 2.0 -
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 °C
Storage Temperature - -40 - +85 °C
* With Matching Networ. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
G Ground
H Ground
TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFCATION
Part No.:
863-RF433.92M-D

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map