RF SAW Filter
Part Number Package Application Last Modified
863-RF315.0M-A

3.8 x 3.8 SMD

 Remote Control Jan. 01, 2007
.
TYPE :
Remote Control, RF SAW Filter

PART NUMBER :
863-RF315.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 315.0 - MHz
Maximum Insertion Loss (IL MIN) 314.82 ~ 315.22 MHz - 2.2 4.0 dB
Stop Band Attenuation:
10.0 ~ 270.0 MHz
45 50 -  dB
270.0~ 309.0 MHz
 30 35 -
309.0 ~ 313.94 MHz
15 20 -
316.0 ~ 335.0 MHz
 10 15 -
335.0 ~ 400.0 MHz
 35 40 -
400.0 ~ 1000.0 MHz
 45 50 -
Pass Band Relative to IL MIN 314.77 ~315.2 MHz - 1.5 3.0 dB
314.77 ~315.26 MHz - 2.0 6.0
3dB Passband Width relative to IL MIN - 0.8 0.92 - MHz
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
Pass Band Ripple 433.76~ 434.16 MHz - 1.0 2.0 -
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +125 ºC
* With Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1 Out
2

Ground
3 Ground
4 Ground
5 In
6 Ground
7 Ground
8 Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
 
Part No.:
863-RF315.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map