RF SAW Filter
Part Number Package Application Last Modified
805-RF434.46M-A

5.0 x 5.0 SMD

 Remote Control Jan. 01, 2007
.
TYPE :
Remote Control, RF SAW Filter

PART NUMBER :
805-RF434.46M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 434.46 - MHz
Insertion Loss 434.30 ~ 434.62 MHz - 2.5 4.0 dB
Relative Attenuation:
10.0 ~ 414.5 MHz
45 50 -  dB
414.50 ~ 428.50 MHz
 30 36 -
428.50~433.42 MHz
15 23 -
435.42 ~ 442.50 MHz
 10 15 -
442.50 ~ 550.0 MHz
 30 38 -
550.0 ~ 1000.0 MHz
 45 55 -
Terminating Impedance - - 50 - ohm
Relative Passband 434.24 ~ 434.68 MHz - 1.0 3.0 dB
434.18 ~ 434.74 MHz - 1.5 6.0 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 10 dBm
Storage Temperature - -40 - +85 ºC
FTC - - 0.032 - ppm/ºC
Operating Temperature - -40 - +85 ºC
* Maximum Rating (Ta=25 ºC)
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground
C Ground
D Ground
E Out
F Ground
G Ground
H Ground
 
TEST FIXTURE
 
FREQUENCY RESPONSE
 
Part No.:
805-RF434.46M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map