RF SAW Filter
Part Number Package Application Last Modified
803-RF425.0M-C

3.8 x 3.8 SMD

 Wireless Jan. 01, 2007
.
TYPE :
Wireless RF SAW Filter

PART NUMBER :
803-RF425.0M-C
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 425.0 - MHz
Maximum Insertion Loss 420.0 ~ 430.0 MHz - 2.5 3.5 dB
Stop Band Attenuation:
Fo-47.8 ~ Fo-37.8 MHz
55 59 -  dB
Fo+37.8 ~ Fo+47.8 MHz
 40 43 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
Amplitude Ripple 420.0 ~ 430.0 MHz - 0.6 1.5 dBp-p
VSWR 420.0 ~ 430.0 MHz - 1.5 2.0 -
Maximum Input Power - - - 0 dBm
Maximum DC Voltage - - - 10 V
Operating Temperature - -10 - +50 ºC
* No Matching Network (Ref. Testing Environment Circuit as shown)
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
VSWR
SMITH CHART
Part No.:
803-RF425.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map