RF SAW Filter
Part Number Package Application Last Modified
803-RF413.7M-A

3.8 x 3.8 SMD

 CDMA450 Tx Jan. 01, 2007
.
TYPE :
CDMA450 (D-Band), RF-Tx SAW Filter

PART NUMBER :
803-RF413.7M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 413.7 - MHz
Maximum Insertion Loss 411.6 ~ 415.9 MHz - 1.8 2.8 dB
Stop Band Attenuation:
0.3 ~ 400.0 MHz
25 27 -  dB
421.6 ~ 425.9 MHz
 30 50 -
425.9 ~ 1700.0MHz
23 27 -
1700.0~ 2000.0 MHz
 18 21 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
VSWR 411.6 ~ 415.9 MHz - 1.5 2.0 -
Maximum Input Power - - - 30 dBm
Operating Temperature - -30 - +80 ºC
* No Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
VSWR
SMITH CHART
Part No.:
803-RF413.7M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map