RF SAW Filter
Part Number Package Application Last Modified
803-RF374.0M-A

3.8 x 3.8 SMD

 CDMA Tx Jan. 01, 2007
.
TYPE :
CDMA Tx RF SAW Filter

PART NUMBER :
803-RF374.0M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 374.0 - MHz
Maximum Insertion Loss 372.0 ~ 376.0 MHz - 3.3 4.0 dB
Attenuation:
DC ~ 350.0 MHz
25 28 -  dB
382.0 ~ 386.0 MHz
 35 40 -
400.0 ~ 500.0 MHz
 28 32 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
Amplitude Ripple 372.0 ~ 376.0 MHz - 0.8 1.5 dBp-p
VSWR 372.0 ~ 376.0 MHz - 1.5 2.0 -
Maximum Input Power - - - 27 dBm
Maximum DC Voltage - - - 0 V
Operating Temperature - -30 - +80 ºC
* No Matching Network (Ref. Testing Environment Circuit as shown)
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
VSWR
SMITH CHART
Part No.:
803-RF374.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map