RF SAW Filter
Part Number Package Application Last Modified
803-RF325.3M-A

3.8 x 3.8 SMD

 Wireless Jan. 01, 2007
.
TYPE :
Wireless RF SAW Filter

PART NUMBER :
803-RF325.3M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 325.3 - MHz
Maximum Insertion Loss 322.0 ~ 328.6 MHz - 2.5 3.5 dB
Attenuation:
Fo-100.0 ~ Fo-39.5 MHz
40 50 -  dB
Fo+39.5 ~ Fo+100.0 MHz
 50 60 -
Source Impedence (single ended)*
-
 - 150 - ohm
Load Impendance (single ended)* - - 150 - ohm
Amplitude Ripple 322.0 ~ 328.6 MHz - 0.8 1.5 dBp-p
Maximum Input Power - - - 0 dBm
Maximum DC Voltage - - - 10 V
Operating Temperature - -30 - +65 ºC
* No Matching Network (Ref. Testing Environment Circuit as shown) Impedance Values can be be modifed if needed.
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In
C Ground
D Ground
E Out
F Ground
 
TEST FIXTURE
Source/ Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
 
Part No.:
803-RF325.3M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map