RF SAW Filter
Part Number Package Application Last Modified
802-RF413.7M-A

3.0 x 3.0 SMD

 CDMA450(D-Band) Jan. 01, 2007
.
TYPE :
CDMA450(D-Band), RF-Tx SAW Filter

PART NUMBER :
802-RF413.7M-A
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Condition
 Minimum Typical Maximum Units
Center Frequency (Fo) - - 413.7 - MHz
Maximum Insertion Loss 411.6~ 415.9 MHz - 2.1 3.2 dB
Stop Band Attenuation:
0.3~ 400.0 MHz
23 26 -  dB
421.6~ 425.9 MHz
 30 48 -
425.9~ 1700.0MHz
23 27 -
1700~ 2000.0 MHz
 15 22 -
Source Impedence (single ended)*
-
 - 50 - ohm
Load Impendance (single ended)* - - 50 - ohm
VSWR 411.6~ 415.9 MHz - 1.3 2.0 -
Maximum Input Power - - - 30 dBm
Operating Temperature - -30 - +80 ºC
* No Matching Network
.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

Out
C Ground
D Ground
E In
F Ground
 
TEST FIXTURE
Source/Load Impedance = 50 ohms
 
FREQUENCY RESPONSE
VSWR
SMITH CHART
Part No.:
802-RF413.7M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map