RF SAW Filter
Part Number Package Application Last Modified
862-RF1690.0M-C 3.0 x 3.0 SMD Wireless January 2010

PART NUMBER :
862-RF1690.0M-C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1690.0 - MHz
Insertion Loss 1681.2 ~ 1698.8 MHz - 3.0 3.5 dB
Maximum DC Voltage - - - 3 V
Maximum Input Power - - - 15 dBm
Operating Temperature - 0 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 190 - ohm
Load Impedance single ended * - 190 - ohm
Attenuation 1577.0 ~ 1626.0 MHz 47 52 - dB
Amplitude Ripple 1681.2 ~ 1698.8 MHz - 0.8 1.5 dB
Group Delay Ripple 1681.2 ~ 1698.8 MHz - 15 20 ns
3db Bandwidth - - 34 40 MHz
10dB Bandwidth - - 42 50 MHz
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

In

C Ground
D Ground
E Out
F Out
G Ground
H Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
862-RF1690.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map