RF SAW Filter
Part Number Package Application Last Modified
861-RF1575.42M-L 2.0 x 2.5 SMD GPS Balanced January 2010

PART NUMBER :
861-RF1575.42M-L

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1575.42 - MHz
Insertion Loss 1575.42 ~ 1576.42 MHz - 1.35 1.9 dB
Ripple 1575.42 ~ 1576.42 MHz - 0.1 0.5 dB
Maximum DC Voltage - - - 3 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -55 - +95 C
Source Impedance single ended * - 50 - ohm
Load Impedance balance ended * - 100 - ohm
Attenuation 100.0 ~ 960.0 MHz 40.0 48.0 - dB
960.0 ~ 1425.0 MHz 35.0 46.0 -
1425.0 ~ 1475.0 MHz 30.0 54.0 -
1475.0 ~ 1515.0 MHz 20.0 39.0 -
1515.0 ~ 1525.0 MHz 17.0 39.0 -
1625.0 ~ 1635.0 MHz 12.0 22.0 -
1635.0 ~ 1675.0 MHz 20.0 24.5 -
1675.0 ~ 1750.0 MHz 30.0 34.5 -
1750.0 ~ 1805.0 MHz 35.0 43.5 -
1805.0 ~ 1980.0 MHz 40.0 50.0 -
1980.0 ~ 2400.0 MHz 35.0 40.0 -
2400.0 ~ 3155.0 MHz 40.0 56.0 -
3155.0 ~ 6000.0 MHz 35.0 55.0 -
VSWR 1574.42x ~ 1576.42 MHz - 1.3 1.8 -
Output Amplitude Balance (|S31|/|S21|) -2.0 1.3 2.0 dB
Output Phase Balance (see PDF spec) -10.0 1.0 10.0 dgree
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Out
D Out
E Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
861-RF1575.42M-L

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map