RF SAW Filter
Part Number Package Application Last Modified
860-RF1575.42M-J 1.6 x 2.0 SMD GPS January 2010

PART NUMBER :
860-RF1575.42M-J

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1575.42 - MHz
Insertion Loss 1574.42 ~ 1576.42 MHz - 0.85 1.00 dB
Maximum DC Voltage - - - 5 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 1574.42 ~ 1576.42 MHz - 0.05 0.30 dB
Attenuation 500.0 ~ 894.0 MHz 20 24 - dB
894.0 ~ 1500.0 MHz 21 25 -
1650.0 ~ 2000.0 MHz 25 28 -
2000.0 ~ 4000.0 MHz 20 27 -
VSWR 1574.42 ~ 1576.42 MHz - 1.20 1.60 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
860-RF1575.42M-J

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map