RF SAW Filter
Part Number Package Application Last Modified
808-RF942.5M-K 1.4 x 1.1 SMD EGSM RX January 2010

PART NUMBER :
808-RF942.5M-K

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 942.5 - MHz
Insertion Loss 925.0 ~ 960.0 MHz - 1.5 2.3 dB
Amplitude Imbalance 925.0 ~ 960.0 MHz -1.0 - 1.0 dB
Phase Imbalance 925.0 ~ 960.0 MHz -5 - 5 C
Maximum DC Voltage - - - 5 V
Maximum Input Power - - - 15 dBm
Operating Temperature - -10 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balance ended * - 150 - ohm
Ripple 925.0 ~ 960.0 MHz - 0.4 1.2 dB
Attenuation D.C. ~ 480.0 MHz 45 55 - dB
480.0 ~ 905.0 MHz 25 30 -
905.0 ~ 915.0 MHz 16 23 -
980.0 ~ 1000.0 MHz 23 30 -
1000.0 ~ 1850.0 MHz 28 32 -
1850.0 ~ 6000.0 MHz 40 45 -
VSWR 925.0 ~ 960.0 MHz - 1.9 2.2 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Out
D Out
E Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
808-RF942.5M-K

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map