RF SAW Filter
Part Number Package Application Last Modified
808-RF1960.0M-E 1.4 x 1.1 SMD PCS RX January 2010

PART NUMBER :
808-RF1960.0M-E

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1960.0 - MHz
Insertion Loss 1930.0 ~ 1990.0 MHz - 1.4 2.4 dB
Amplitude Imbalance 1930.0 ~ 1990.0 MHz -2.0 -0.8/+0.8 2.0 dB
Phase Imbalance 1930.0 ~ 1990.0 MHz -12 -5/+5 12 C
Maximum DC Voltage - - - 5 V
Maximum Input Power - - - 15 dBm
Operating Temperature - -10 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balance ended * - 150 - ohm
Ripple 1930.0 ~ 1990.0 MHz - 0.6 1.8 dB
Attenuation D.C. ~ 1830.0 MHz 25 27 - dB
1830.0 ~ 1910.0 MHz 8 13 -
2010.0 ~ 2070.0 MHz 8 12 -
2070.0 ~ 2150.0 MHz 18 22 -
2150.0 ~ 3000.0 MHz 26 35 -
3000.0 ~ 6000.0 MHz 35 50 -
VSWR 1930.0 ~ 1990.0 MHz - 1.6 2.3 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Out
D Out
E Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
808-RF1960.0M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map