RF SAW Filter
Part Number Package Application Last Modified
808-RF1842.5M-E 1.4 x 1.1 SMD DCS RX January 2010

PART NUMBER :
808-RF1842.5M-E

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1842.5 - MHz
Insertion Loss 1805.0 ~ 1880.0 MHz - 1.4 2.4 dB
Amplitude Imbalance 1805.0 ~ 1880.0 MHz -2.0 -0.5 ~ 1.5 2.0 dB
Phase Imbalance 1805.0 ~ 1880.0 MHz -12.0 -3.4 ~ 0.5 12.0 C
Maximum DC Voltage - - - 5 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -10 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance balance ended * - 150 - ohm
Ripple 1805.0 ~ 1880.0 MHz - 0.5 1.8 dB
Attenuation D.C. ~ 1300.0 MHz 40 47 - dB
1300.0 ~ 1705.0 MHz 25 36 -
1705.0 ~ 1785.0 MHz 10 17 -
1920.0 ~ 1980.0 MHz 16 19 -
1980.0 ~ 3000.0 MHz 18 27 -
3000.0 ~ 5000.0 MHz 35 42 -
5000.0 ~ 6000.0 MHz 32 36 -
VSWR 1805.0 ~ 1880.0 MHz - 1.8 2.3 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A In
B

Ground

C Out
D Out
E Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
808-RF1842.5M-E

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map