RF SAW Filter
Part Number Package Application Last Modified
802-RF1401.0M-A 3.0 x 3.0 SMD Wireless January 2010

PART NUMBER :
802-RF1401.0M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1401.0 - MHz
Insertion Loss 1381.0 ~ 1421.0 MHz - 2.1 3.0 dB
Maximum DC Voltage - - - 0 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -55 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 1381.0 ~ 1421.0 MHz - 1.2 2.0 dB
Attenuation 1150.0 ~ 1350.0 MHz 28 30 - dB
1450.0 ~ 1650.0 MHz 28 32 -
x ~ x MHz x x -
x ~ x MHz x x -
x ~ x MHz x x -
x ~ x MHz x x -
VSWR 1381.0 ~ 1421.0 MHz - 1.5 2.3 -
Bandwidth -20dB 65 70 - MHz
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

Pin Layout
A Ground
B Out
C Ground
D Ground
E In
F Ground

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
802-RF1401.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map