RF SAW Filter
Part Number Package Application Last Modified
800-RF1960.05M-D 2.0 x 1.6 SMD Wireless January 2011

PART NUMBER :
800-RF1960.0M-D

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 1960.0 - MHz
Insertion Loss 1930.0 ~ 1990.0 MHz - 2.4 3.5 dB
Maximum DC Voltage - - - 7.5 V
Maximum Input Power - - - 15 dBm
Operating Temperature - -30 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Ripple 1930.0 ~ 1990.0 MHz - 1.3 2.0 dB
Attenuation DC ~ 1850.0 MHz 20.0 26.0 - dB
1850.0 ~ 1910.0 MHz 10.0 19.0 -
2030.0 ~ 2080.0 MHz 28.0 31.0 -
2110.0 ~ 2170.0 MHz 25.0 30.0 -
2170.0 ~ 2550.0 MHz 25.0 30.0 -
VSWR 1930.0 ~ 1990.0 MHz - 1.8 2.5 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A Ground
B

In

C Ground
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
800-RF1960.0M-D

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map