RF SAW Filter
Part Number Package Application Last Modified
802-RF915.0M-C 3.0 x 3.0 SMD Remote control receivers Jun. 23 2003
.
TYPE :
915.0 MHz RF SAW Filter
Low Loss (3.0dB max.)

PART NUMBER :
802-RF915.0M-C
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 915.0 - MHz
Insertion Loss 902.0 ~ 928.0 MHz - 2.5 3.0 dB
DC Voltage - - - 5 V
Input Power - - - 20 dBm
Operating Temperature - -30 - +65 °C
Storage Temperature - -40 - +85 °C
Ripple 902.0 ~ 928.0 MHz - 0.7 1.5 dB
Stopband Attenuation DC ~ 800 MHz 50.0 60.0 - dB
800.0 ~ 845.0 MHz 50.0 55.0 -
845.0 ~ 880.0 MHz 45.0 50.0 -
950.0 ~ 990.0 MHz 26.0 31.0 -
990.0 ~ 1200.0 MHz 50.0 58.0 -
1200.0 ~ 2000.0 MHz 30.0 38.0 -
VSWR 902.0 ~ 928.0 MHz - 1.45 2.0 -
Teminating Impedance - - 50 - ohm
* Maximum Rating (Ta=25°C)
** Custom SAW RF Filters available. Contact Oscilent for assistance.
.

Pin Layout
A Ground
B Output
C Ground
D Ground
E Input
F Ground
Frequency Reponse
VSWR (S11, S22)
Smith Chart
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com		 Part No.:
802-RF915.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map