IF SAW Filter
Part Number Package Application Last Modified
835-IF65.0M-G 35.0 x 12.80 Base Station & Repeater Apr 18, 2007
.
TYPE :
65.0 MHz Bandpass Filter
9.40 MHz Bandwidth

PART NUMBER :
835-IF65.0M-G
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 65.0 - MHz
Insertion Loss at Fo - 21.5 23.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 9.20 9.28 - MHz
Bandwidth at -3.0 dB 9.40 9.50 - MHz
Bandwidth at -50.0 dB - 10.45 10.55 MHz
Amplitude Ripple - 0.7 0.9 dBp-p
Group Delay Variation - 80 120 nsec
Absolute Delay at Fo - 3.46 - µsec
Ultimate Rejection 50 55 - dB
Temperature Coefficient - -72 - ppm/°C
*With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary.
.
PACKAGE OUTLINE (mm) TEST FIXTURE

Pin Description: IN-1, OUT-5, Ground-2,3,4,6,Case

 

 
FREQUENCY RESPONSE
Part No.:
835-IF65.0M-G

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map