IF SAW Filter

TYPE : 70.0 MHz Bandpass Filter Low Loss 7 MHz Bandwidth PART NUMBER : 813-SL70.0M-07

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS

PARAMETERS Minimum Typical Maximum Units Center Frequency 69.8 70.00 70.2 MHz Insertion Loss - 8.6 9.5 dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth 1.0 dB 6.4 6.8 - MHz Bandwidth 3.0 dB 7.4 7.8 - MHz Bandwidth 40.0 dB - 11.0 11.5 MHz Passband Ripple - 0.65 1.0 dB Group Delay Variation - 80 150 nsec Absolute Delay - 0.85 - µsec Substrate Material - YZ-LN - - Ambient Temperature - 25 - °C Ultimate Rejection 40 42 - dB Temperature Coefficient - -94 - ppm/°C

PACKAGE OUTLINE (mm)	TEST FIXTURE
	L1 = 180nH - - L2 = 150nH - - Source/Load Impedance = 50 ohms

Part No.:

813-SL70.0M-07

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map