IF SAW Filter
Part Number Package Application Last Modified
813-IF62.5M-BC 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007
.
TYPE :
62.5 MHz Bandpass Filter
Low Loss
20.85 MHz Bandwidth

PART NUMBER :
813-IF62.5M-BC
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 62.5 - MHz
Insertion Loss at Fo - 22.0 23.5 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Bandwidth at -1.0 dB 19.80 20.10 - MHz
Bandwidth at -3.0 dB 20.85 21.15 - MHz
Bandwidth at -40.0 dB - 25.80 26.20 MHz
Relative Attenuation: - - - -
Lower Sidelobe 40 45 - dB
Upper Sidelobe 40 45 - dB
Amplitude Ripple - 0.5 1.0 dBp-p
Group Delay Variation - 25 50 nsec
Absolute Delay at Fo - 0.85 - µsec
IN/OUT Return Loss at Fo - - - dB
Temperature Coefficient - -94 - ppm/°C
*With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


L1 = 180nH - -
L2 = 150nH C2 = 20pF
Source/Load Impedance = 50 ohms
 
FREQUENCY RESPONSE

Part No.:

813-IF62.5M-BC

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map