Oscilent Corporation IF SAW Filter



	IF SAW Filter

Part Number	Package	Application	Last Modified
871-IF38.912M-F	11.5 x 4.8 SMD	DAB	Jan. 01, 2007

TYPE :

38.912 MHz IF SAW Filter for DAB Application

1.5 MHz Bandwidth

PART NUMBER :

871-IF38.912M-F

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS

PARAMETERS	Minimum	Typical	Maximum	Units
Center Frequency	-	38.912	-	MHz
Insertion Loss at Fo	-	17.0	19.0	dB
-3.0 dB Bandwidth	-	1.5	-	MHz
-30.0 dB Bandwidth	-	2.5	-	MHz
Relative Attenuation 30.00 to 36.26 MHz	38	43	-	dB
Relative Attenuation 36.26 to 37.30 MHz	38	42	-	dB
Relative Attenuation 40.60 to 41.40MHz	38	42	-	dB
Relative Attenuation 41.40 to 50.00MHz	38	43	-	dB
Source Impedance (Single Ended or Balanced)*	-	50/2000	-	ohm
Load Impedance (Single Ended or Balanced)*	-	50/2000	-	ohm
Group Delay Variation	-	80	200	ns
Storage Temperature	-40	-	+85	ppm/°C
Operating Temperature	-30	-	+80	°C
Temperature Coefficient	-	-20	-	ppm/°C
Absolute Delay at Fo	-	1.36	-	µsec

* With Matching Network (Ref. Testing Environment Circuit as shown below)
Those impedances could be modified with different impedance values and/or structures, if necessary.
** Custom SAW IF Filters available. Contact Oscilent for assistance.

PACKAGE OUTLINE (mm)

TEST CIRCUIT

SOURCE AND LOAD IMPEDANCE: 50 or 2K ohm

FREQUENCY RESPONSE

GROUP DELAY VARIATION

Part No.:

871-IF38.912M-F