IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-SA 35 x 12.8 Thru Hole 70.0MHz Bandpass Filter Jan. 01, 2007
.
TYPE :
70.0 MHz Bandpass Filter
1.26 MHz Bandwidth

PART NUMBER :
835-IF70.0M-SA
.
FREQUENCY CHARACTERISTICS
Horizontal : 0.5 MHz/Div
Veritical : 10 dB/Div
Horizontal : 0.2 MHz/Div
Veritical : 1.0 dB/Div
Veritical : 100 ns/Div
.
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 69.97 70.0 70.03 MHz
Insertion Loss - 20.0 22.0 dB
1 dB Bandwidth 1.26 1.29 - MHz
40 dB Bandwidth 1.8 1.78 - MHz
Attenuation at Fo+/-0.9MHz 40 43 - dB
Attenuation at Fo+/-1.25MHz 40 45 - dB
Attenuation at Fo+/-1.7MHz 40 45 - dB
Passband Ripple @ Fo+/-0.55MHz - 0.7 1.0 dB
Phase Linearity - 4.2 5.0 rms
Absolute Delay - 3.45 - µsec
Ultimate Rejection 40 50 - dB
Substrate Material - Qz - -
Ambient Temperature - 25 - C
* Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm) TEST FIXTURE


 
L1=220 nH L2=220 nH
C1=51 pF C2=56 pF
Source Impedance = 50 ohms
Load Impedance = 50 ohms
Part No.:
835-IF70.0M-SA

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map