IF SAW Filter
Part Number Package Application Last Modified
835-IF32.7M-B 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007
.
TYPE :
32.7 MHz Bandpass Filter
 

PART NUMBER :
835-IF32.7M-B
. .
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 32.7 - MHz
Insertion Loss at Fo - 27.5 30.0 dB
Storage Temperature -40 - +85 °C
Operating Temperature -40 - +85 °C
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -72 - ppm/°C
Amplitude Ripple (29.7~ 35.7 MHz) - 0.55 1.0 dBp-p
Phase Linearity (29.7~ 35.7 MHz) - 3.2 4.0 deg
Bandwidth at 3.0 dB 6.6 7.05 - MHz
Bandwidth at 40.0 dB - 7.97 8.3 MHz
Ultimate Rejection 50 55 - dB
Group Delay Variation - 60 100 ns
Adsolute Delay at Fo - 3.68 - us
* with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary.
** Custom SAW IF Filters available. Contact Oscilent for assistance.
.
PACKAGE OUTLINE (mm)
PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case
 
TEST ENVIRONMENT
Source & Load Impedance: 50 ohm
 
FREQUENCY RESPONSE
Part No.:
835-IF32.7M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map