Oscilent Corporation IF SAW Filter | 820-IF70.0M-U



	IF SAW Filter

Part Number	Package	Application	Last Modified
820-IF70.0M-U	20.2 x 12.6 Thru Hole	Base Station & Repeater	Jan. 01, 2007

.

TYPE :

70.0 MHz Bandpass Filter

0.59 MHz Bandwidth

PART NUMBER :

820-IF70.0M-U

.

FREQUENCY CHARACTERISTICS

Horizontal	:	0.5 MHz/Div
Veritical	:	10 dB/Div

Horizontal	:	0.1 MHz/Div
Veritical	:	1 dB/Div
Veritical	:	100 ns/Div

.

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS

PARAMETERS	Minimum	Typical	Maximum	Units
Center Frequency	69.97	70.00	70.03	MHz
Insertion Loss	-	13.7	15.0	dB
1dB Bandwidth	0.30	0.39	-	MHz
3dB Bandwidth	0.47	0.59	-	MHz
40dB Bandwidth	-	1.395	1.42	MHz
Passband Ripple	-	0.8	1.5	dB
Phase Linearity	-	3.0	6.0	degc
Group Delay Variation	-	300	500	nsec
Absolute Delay	-	2.5	-	µsec
Ultimate Rejection	40	50	-	dB
Substrate Material	-	Quartz	-	-
Ambient Temperature	-	25	-	°C

* Custom SAW IF Filters available. Contact Oscilent for assistance.

.

PACKAGE OUTLINE (mm)

TEST FIXTURE

L1 =	560nH	C1 =	30pF
L2 =	390nH	C2 =	22pF
Source/Load Impedance = 50 ohms

Part No.:

820-IF70.0M-U

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map