VCXO Surface Mount
Series Number Package Description Last Modified
566 6 Pad PCB SMD HCMOS / TTL Jan. 01 2007
FEATURES
- Wave form symmetry of 40/60%
- SMD Version 6 Pad
- 3.3V operation (optional)
- Tape and Reel
- RoHs / Lead Free compliant RoHS Compliant VCXO
hcmos voltage control oscillator vcxo
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS CONDITIONS CHARACTERISTICS UNITS
Output Logic - HCMOS / TTL Output -
Input Voltage (VDD) - 3.3 ±10%  5.0 ±10%  VDC
Frequency Range (fO) - 1.5440 ~ 52.0 MHz
Operating Temperature (TOPR) - 0 ~ +70 (Std.) / -40 ~ 85 (Option) °C
Storage Temperature (TSTG) - -55 ~ +125 °C
Overall Frequency Stability a + b + c + d ±20, ±25, ±50, ±100 max. PPM
(a) Frequency Tolerance Inclusive of Overall Stability -
(b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) -
(c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) -
(d) Load Stability Inclusive of Overall Stability (RL ±5%) -
Input Current (IDD) - 10 ~ 45 max. 15 ~ 85 max. mA
Aging @ 25°C ±1 max. PPM/Y
Rise Time (TR) / Fall Time (TF) < 66.660 MHz 10 max. (0.4V to 2.4V / TTL; Waveform / HCMOS) nS
> 66.660 MHz 4 max. (0.4V to 2.4V / TTL; Waveform / HCMOS)
Pin 1 Control Voltage Range - 1.65 ±1.35 2.5 ±2 V
Output Voltage High "1" VOH TTL Load 2.4 min. VDC
HCMOS Load 2.7 min. VDD-0.5 min.
Output Voltage Low "0" VOL TTL Load 0.4 max. VDC
HCMOS Load 0.5 max.
Duty Cycle - 50 ±10 (Std.) / 50 ±5 (Option) %
Start-Up Time (TS) - 10 max. ms
Jitter (One Sigma) ±25 max. (Under 52 MHz) , ±50 max. (Over 52 MHz) ps
Linearity - ±20 (Std.) / ±10 (Option) / Custom Spec. Avail. %
Absolute Pull Range (APR) - ±50, ±100, ±150 min. PPM
spec for hcmos vcxo pcb type
PIN CONNECTIONS
#1 Control Voltage
#2 Tri-State Enable High (TS) or No Connection (NC)
#3 CASE GND
#4 OUTPUT
#5 No Connection (NC)
#6 VDD
PART NUMBER GUIDE
Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pulling Range Linearity Pin 2 Connection
566 - 12.0 M - 3 E N - T P1 20 NC
Oscilent
VCXO
Enter your desired frequency e.g. 12.0M for 12.000MHz
5 = 5VDC
3 = 3.3VDC
D =  ±100 PPM
E = ±50 PPM
F = ±25 PPM
G =  ±20 PPM
H = ±10 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10%
T = 50±5%
P1 = ±50PPM
P2 = ±100PPM
P3 = ±150PPM
20 = 20%
10 = 10%
05 = 5%
NC = No Connection
TS = Tri-State Enable High
NOTE: - Deviations on all parameters available.  Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections  indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.:
566

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map