SMD Oscillators
Series Number Package Description Last Modified
434 5 x 3.2 SMD Ceramic HCMOS / TTL Output Jan. 01 2007
FEATURES
- Ultra Low Jitter 1pS
- Low power consumption
- Tape and Reel
- Miniature profile 5 x 3.2 x 1.0
- 3.3V or 5.0V optional
- RoHs / Lead Free compliant rohs compliant
5x3.2mm 1pS jitter for low jitter applications
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS CONDITIONS CHARACTERISTICS UNITS
Output Logic - HCMOS / TTL Output -
Input Voltage (Vdd) - 3.3 ±10%  5.0 ±10%  VDC
Frequency Range (fO) - 0.450 ~ 100.00 MHz
Operating Temperature (TOPR) - 0 ~ +70 Std. (Ext Temp Avail. See Table Below) °C
Storage Temperature (TSTG) - -55 ~ +125 °C
Frequency Stability a + b + c + d ±20, ±25, ±50, ±100 max. ppm
(a) Frequency Tolerance Inclusive of Overall Stability -
(b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) -
(c) Input Voltage Stability Inclusive of Overall Stability (Vdd ±5%) -
(d) Load Stability Inclusive of Overall Stability (RL ±5%) -
Current Consumption - 10 ~ 45 (35) max. 15 ~ 85 (50) max. mA
Aging @ 25°C ±5 max. ppm/Y
Rise Time (TR) / Fall Time (TF) < 23.999 MHz 10 max. nS
24.00 ~ 70.00 MHz 6 max.
70.001 ~ 100.00 MHz 4 max.
PIN 1 Tri-State Input Voltage (Option) - Vh (Pin 1) No Connection : Enables Output -
- Vh (Vih) > 2.2 Vdc : Enables Output
- Vl (Vil) < 0.8 Vdc : Disables Output (High Impedance)
Output Voltage High "1" VOH TTL Load 2.4 min. VDC
HCMOS Load Vdd * 0.9 min.
Output Voltage Low "0" VOL TTL Load 0.4 max. VDC
HCMOS Load Vdd * 0.1 min.
Duty Cycle - 50 ±10 (Std.) / 50 ±5 (Option) %
Start-Up Time (TS) - 10 max. mS
Jitter (12KHz to 20MHz) RMS: ±1 max. ps
specification for low jitter oscillator
PIN CONNECTIONS
#1 No Connection or Tri-State Enable High
#2 Case Ground
#3 Output
#4 Vdd
PART NUMBER GUIDE
Series
Number		 Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 Connection
434 - 12.0M - 3 E N - T TS
Oscilent
SMD Oscillators
Enter your desired frequency e.g. 12.0M = 12.000MHz
5 = 5VDC
3 = 3.3VDC
D =  ±100 ppm
E = ±50 ppm
F = ±25 ppm
G = ±20 ppm
Blank* = 0~+70
C = -10~+70
D = -20~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
NC = No Connnection
TS = Tri-State Enable High
NOTE: - Deviations on all parameters available.  Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com		 Series No.:
434

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map