SMD Quartz Crystal
Series Number Package Description Last Modified
282 7 X 5 SMD 2 Pad Jan. 01 2002
.
FEATURES
- Seam welded metal lid / ceramic package
- 1.7mm max. low profile
- Tight stability / High reliability
- Wide frequency range
- Tape and Reel
..
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS CHARACTERISTICS UNITS
Frequency Range fO 9.80 ~ 100.00 MHz
Frequency Tolerance @ 25ºC ±30, ±15*, ±25, ±50 PPM
Frequency Stability Ta = 0 +70ºC ±50, ±25, ±30*, ±100 PPM
Operating Temperature TOPR -0 ~ +70 (Std.) / Extended Options Avail. ºC
Storage Temperature TSTG -40 ~ +85 ºC
Shunt Capacitance CO 5.0 max. pF
Load Capacitance CL (Customer Specified) 20 (Std.) Series Resonance and others Avail. pF
Drive Level 9.80 ~ 100.00 MHz. 0.5 max. µW
Aging @ 25ºC ±5 PPM/Y
Insulation Resistance @ 100 VDC 500 min. Mohms
*±15ppm Tolerance with ±30ppm Stability available in AT Cut Only
..
EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION
FREQUENCY RANGE (MHz) MODE MAX ESR Ohm
9.800 ~ 15.999 Fundamental 60
16.000 ~ 42.000 Fundamental 40
FREQUENCY RANGE (MHz) MODE MAX ESR Ohm
16.000 ~ 34.999 3rd O/T 60
35.000 ~ 100.000 5th O/T 60
..
.
PART NUMBER GUIDE
Series
Number		 Frequency Load Capacitance Tolerance @ +25oC Tolerance Over
Temp ( oC )		 Operating 
Temp ( oC )		 Packaging**
282 - 12.0M - SR - 50 N U - TR
Oscilent
7 x5 SMD
2 Pad
See table below for standard freq. and enter here e.g. 12.048M for 12.048 MHz OR enter any desire frequency. Enter desired capacitance here. See table below for standard load capacitance e.g. -20 for 20pF or Enter SR for Series.
Blank * = ±30 PPM
15 = ±15 PPM
25 = ±25 PPM
50 = ±50 PPM
Blank* = ±50 PPM
E = ±25 PPM
G = ±30 PPM
N = ±100 PPM
U =  0~+70
S =  -20~+70
W = -40~+85
Blank* = Bulk
TR = Tape/Reel
NOTE: Deviations on all parameters available.  Please consult Oscilent for details.
DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic.
**PACKAGING: Click on the packaging name above for tape/reel specifications
.
STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE
FREQUENCY
(MHz)		 LOAD (pF)
Series 12 13 16 17 18 20 30
9.8304 Std. --------- --------- --------- --------- - Std. ---------
10.000 Std. - - - - - - -
11.0592 Std. - - - - - Std. -
12.000 Std. - - - - - - -
14.31818 Std. - - - - - Std. -
16.000 Std. - - - - - - -
18.432 Std. - - - - - - -
19.6608 Std. - - - - - - -
20.000 Std. - - - - - Std. -
24.000(F) Std. - - - - - Std. -
24.00014 (F) Std. - - - - - - -
30.000 (F) Std. - - - - - - -
30.000 (OT) Std. - - - - - - -
32.000 (F) Std. - - - - - - -
32.000 (OT) Std. - - - - - - -
33.000 (OT) Std. - - - - - - -
33.8688 (F) - - - - - - - -
35.2512(OT) Std. - - - - - - -
36.000 (F) Std. - - - - - - -
36.000 (OT) Std. - - - - - - -
40.000 (F) Std. - - - - - - -
40.00 (OT) Std. - - - - - - -
40.32 (F) Std. - - - - - - -
40.32 (OT) Std. - - - - - - -
FREQUENCY
(MHz)		 Series 12 13 16 17 18 20 30
LOAD (pF)
F = Fundamental | OT = 3RD OT
NOTE: Other frequencies and load capacitance available.  Please consult Oscilent for part numbers.
Series No.:
282

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map