Crystal Oscillator
Series Number Package Description Last Modified
391 14 Pin Dip 5 Leads PECL Output July 01 2005
FEATURES
- Wave form symmetry as low as 45/55%
- PECL output
- Industry standard 14 pin Dip
- 3.3V or 5V optional
- RoHs / Lead Free compliant RoHS / Lead Free Compliant Oscillators
PECL crystal oscillator 14 pin dip thru hole
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS CONDITIONS CHARACTERISTICS UNITS
Output Logic - Positive ECL Square Wave (PECL) -
Input Voltage (VDD) - 3.3 ±10%  5.0 ±10%  VDC
Frequency Range (fO) - 19.440 ~ 180.0 (Fund, Third, Fifth / UM-1) MHz
Operating Temperature (TOPR) - 0 ~ +70 (Std.) / -40 ~ 85 (Option) °C
Storage Temperature (TSTG) - -55 ~ +125 °C
Overall Frequency Stability - ±20 (0 ~ +70°C Only), ±25, ±50, ±100 max. PPM
(a) Frequency Tolerance Inclusive of Overall Stability -
(b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) -
(c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) -
(d) Load Stability Inclusive of Overall Stability (RL ±5%) -
Input Current (IDD) - 80 max. 120 max. mA
Aging @ 25°C ±1 max. PPM/Y
Rise Time (TR) 20% to 80% of Waveform 2 max. nS
Fall Time (TF) 20% to 80% of Waveform 2 max. nS
Output Voltage High "1" VOH PECL VDD - 1.025 min. VDC
Output Voltage Low "0" VOL PECL VDD - 1.620 max. VDC
Load - 50 Ohms
Duty Cycle 50% of Waveform 50 ±10 (Std.) / 50 ±5 (Option) %
Start-Up Time (TS) - 10 max. mS
Jitter RMS 3.5 max. ps
PIN CONNECTIONS
#1 No Connection (NC) or Tri-State Enable Low (TS)
#7 Ground
#8 Output
#12 Complimentary Output (CO) or No Connection (NC)
#14 Vdd
PART NUMBER GUIDE
Series
Number		 Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 & 9 Connection
391 - 28.0 M - 5 D N - T NC1
Oscilent
SMD Oscillators
Enter your freq.
e.g. 28.0M = 28.00 MHz
5 = 5VDC
3 = 3.3VDC
D =  ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
TS1 = TS (pin 1) and CO (pin9)
TS2 = TS (pin 1) and NC (pin9)
NC1 = NC (pin 1) and CO (pin9)
NC2 = NC (pin 1) and NC (pin9)
NOTE: - Deviations on all parameters available.  Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.:
391

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map